ViewSonic VP2785-4K - Page 58

58
To enable the PBP mode:
1. Open the OSD Menu and select the Setup Menu menu. Then touch the 3 key to
enter the menu.
2. Touch the 1 or 2 key to select Multi-Picture. Then touch the 3 key to enter its
sub-menu.
3. Touch the 1 or 2 key to select PBP Left-Right. Then touch the 3 key to enable the
PBP mode.
Off
Quad Windows
PBP Top-Bottom
PBP Left-Right
PIP
Dual Color
720P60
VP2785-4K
Setup Menu
Color Adjust ViewMode
Manual Image
Adjust
Input
Select
Audio Adjust
Multi-Picture
ECO Mode
DisplayPort 1.2
HDMI 2.0
USB 3.1
DDC/CI
Save As
Backlight Sensor
All Recall
Left Source
Right Source
Swap
To activate the KVM function:
Touch and hold the 1 key for 1 second to activate the KVM function. Then switch
the cursor between the two screens (left/right window).