ViewSonic VP2785-4K - Page 81

81
M
Multi-Picture
Under MULTI-PICTURE MODE you can select the following settings, QUAD
WINDOW, PBP TOP-BOTTOM, PBP LEFT-RIGHT, and PIP. The explanations for
each setting are below:
 QUAD WINDOWS: Display four windows on a 2x2 split screen. User can
specify the input source for each screen.
 PBP TOP-BOTTOM: Display two windows, a 1x1 split screen, side-by-side
on the top and bottom of the screen. User can specify the input source
for each screen.
 PBP LEFT-RIGHT: Display two windows, a 1x1 split screen, side-by-side
on the left and right of the screen. User can specify the input source for
each screen.
 PIP: Split the screen into two parts, a main window and an inset window.
User can specify the input source for each screen.
 PIP SIZE: This controls the size of the sub-picture used in PIP.
 PIP POSITION: This controls the position of the sub-picture used in PIP
mode.
 PIP SWAP: This swaps the main-picture source with the sub-picture
source.
 SOURCE SELECT: This selects the sources of the MULT-PICTURE MODE
settings used in the QUAD WINDOW, PBP TOP-BOTTOM, PBP LEFT-RIGHT
and PIP.
O
Offset
Adjusts black levels for red, green, and blue.
The gain and offset functions allow users to control the white balance for
the upmost control when manipulating contrast and dark scenes.
OSD Pivot
Sets the monitor’s On-Screen Display (OSD) Menu display direction.
Options Description
Auto With built-in G sensor, the OSD can auto pivot when
positioned vertically.
0° Sets the OSD Menu without pivot.
+90° Sets the OSD Menu +90° pivot.
-90° Sets the OSD Menu -90° pivot.
180° Sets the OSD Menu 180° pivot.