23
Media Player Connecon
To connect to a media player:
1. Connect the HDMI cable to the HDMI ports on your ViewBoard and peripheral
device.
2. Plug in the power cord of your ViewBoard, and turn on the rear-panel power
supply switch.
3. Press the
Power button on the right-hand side of the ViewBoard to turn the
screen on.
4. Press the INPUT button to switch to the “HDMI” input source.
NOTE:
• HDMI 1/2/3 supports up to 3840 x 2160 @ 60Hz
• HDMI 1/2 supports HDMI CEC
To Next Page
Loading...
