ViewSonic VS17583

3737
General Sengs
To select an Input Source:
1. Press INPUT on the remote control to display the General Setting menu, then
press DOWN to enter the Input Source menu.
2. Press DOWN/UP/LEFT/RIGHT to select the input source you want.
3. Press ENTER on the remote control, or touch the input source.
4. Press EXIT on the remote control, or touch a blank area outside of the menu to
exit.
To adjust the Backlight and enable/disable Flicker Free:
1. Press INPUT on the remote control to display the General Setting menu.
2. Drag the brightness slider directly to adjust the backlight value, and/or touch the
Flicker Free icon to enable/disable the function.
3. Press EXIT on the remote control, or touch a blank area outside of the menu to
exit.