ViewSonic VS17583

6565
Wake on Acve Source
The ViewBoard will detect HDMI and VGA signals in Standby mode. If HDMI or VGA
has a signal output, the ViewBoard will power on automacally.
Auto Search
When enabled, if the current source does not have a signal, the ViewBoard will
automacally search the input sources one me.
Channel Auto Switch
When enabled, if the ViewBoard detects a new signal input it will switch the input
source automacally.
No Signal Power O
Adjust the “No Signal” power o mer.
HDMI CEC Sengs
Enable/disable HDMI CEC funcons.