ViewSonic VSD220 - Terminate a Pairing Partnership; Change Your Devices Bluetooth Name

Using Your VSD220 Smart Display
24
4.6.3 Terminate a pairing partnership
1
Touch the Home button│ Settings │ Bluetooth.
2
Under the Paired devices section, touch the icon next to a paired
device.
3
Touch Unpair to erase all pairing information with that device. You need
to re-enter the password if you want to restore a Bluetooth connection
to that device.
4.6.4 Change your device’s Bluetooth name
1
Ensure that you have turned on Bluetooth
on your device
(Icon in the status area of the system bar
indicates that Bluetooth is enabled).
2
Touch the Home button │ Settings │ Bluetooth. Ensure Bluetooth -
Device name.
3
Enter a name to identify the device when you connect using Bluetooth.
4
Touch OK.