VIKING ACCESS SYSTEMS
631 Wald Irvine, CA 92618
Phone 800.908.0884
Fax 949.753.1640
www.vikingaccess.com
STANDARD FEATURES
AND OPERATOR SPECIFICATIONS
INSTALLATION DATE: __________________________________
COMPANY / INSTALLER: ________________________________
CONTAC T: __________________________________________
SERIAL NUMBER(S): ____________________________________
ALL INSTALLATION, MAINTENANCE AND REPAIR WORK MUST BE
DOCUMENTED AND MADE AVAILABLE TO THE USER.
• UL Listed; UL325 and UL991
• ETL Listed; UL325 and UL991
• Fire Authority compliant
• Manual Release Mechanism
• Elegant design, appealing to any
architectural project
• Powder coated steel chassis
• Opening up to 120°
• 100% duty cycle
• Built-in power-outage managment options
• 800 cycles of operation on backup battery
(600 lb. gate and 12’ length)
• Intelligent speed control with smooth start
and stop, self-adjust system
• Intelligent obstruction detection with
adjustable sensitivity
• Adjustable delay for overlaping dual gates
• Hold Open Timer to automatically close
the gate
• Built-in protection against lightning strikes
or similar electrical surges
• Inherent overload protection; redundancy
design using multiple types of protection
• Modular connectors for easy access control
and accessory installation
• Regulated power supply for your external
accessories
• LED indicators display gate and operator
status for easy troubleshooting
• On-Board LCD Display provides diagnostics,
operator status, settings and real-time volt
and amp readings
• Built-in motor heater for cold weather
applications
• Equipped for 115/230 VAC, 24 VAC/VDC
and Solar power supplies
To Previous Page
Loading...
