12
ACCESSORY BOX
In the accessory box there is a special tray
for presser feet and bobbins plus a space for
other accessories.
Store the presser feet and the bobbins in the
tray so they are always easily accessible.
Remove the Accessory Box /
Use the Free arm
Keep the accessory box on the machine to
provide a larger fl at work surface.
Slide the accessory box to the left when you
wish to remove it and use the free arm.
To facilitate sewing trouser legs and sleeve
hems use the free arm.
To replace the Accessory Box, slide it tight
onto the machine until it fi ts in place.
EXTENSION TABLE
(only EMERALD™ 203)
Use the Extension Table to extend the sewing
surface so you can easily sew large projects
and quilts.
1. Unpack the table and remove the
protective plastic fi lm.
2. Place the table on a fl at suface so that
the holes for the legs are facing upwards.
Mount the legs into the holes.
3. Slide the table onto the free arm of the
machine. If neccessary screw the feet up
or down to adjust the height.
To Next Page
Loading...
