EasyManua.ls Logo

Viking Emerald 203 - Edge Finishing

Viking Emerald 203
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
1:7 Overcast Stitch
Fabric: Stretch light or woven
light/medium, cut in two.
Use: Presser Foot J.
Let the toe of the presser foot
guide the fabric as shown in the
picture.
1:8 Stretch Seam Overcast Stitch
Fabric: Stretch heavy, cut in two
Use: Presser Foot B and size 90.
2:1 Double Overlock Stitch
Fabric: Woven heavy, cut in two.
Use: Presser Foot B and size 80.
1:4 Three-Step Zigzag
Fabric: All types of fabric.
Use: Presser Foot J.
EDGE/QUILTING GUIDE
The Edge/Quilting Guide is used for wide
seam allowances, topstitching, or channel
quilting. Slide the guide into the clip on the
ankle. Adjust to the desired position.
OVERCAST
The three-step zigzag, is up to 1/4’’ (7mm)
wide and suitable for all types of fabrics. Use
this stitch for overcasting, butting two edges
together to join them, mending tears and
other special nishing.
Use Edging Foot J when overcasting.
SEAM AND OVERCAST
The Seam/Overcast stitch sews the seam and
overcasts the edge all at one time. There are a
number of different Seam/Overcast stitches
on your sewing machine, to give the best
result for your chosen fabric.

Table of Contents

Related product manuals