36
BLIND HEM
The blind hem creates an invisible hem on
garments. There are two types of blind hem;
one is recommended for medium to heavy
woven fabric, the other for medium to heavy
stretch fabric.
Fold the fabric as illustrated. Make sure the
folded edge of the fabric follows the inside of
the right “toe” of Blind Hem Foot D.
Lower the presser foot and step on the foot
control.
The left swing of the needle should just catch
the edge of the folded fabric.
If neccessary, adjust the stitch width as
needed to barely “catch” the fold.
Note: The blind hem technique is not recommended for
light weight fabric.
medium/heavy
woven fabric
medium/heavy
stretch fabric
To Next Page
Loading...
