5. CARE OF YOUR MACHINE
41
To keep your sewing machine operating well, clean it often. No lubrication (oiling) is needed.
Turn off the main switch.
CLEANING
Wipe the exterior surfaces of your sewing machine with a soft cloth to remove any dust or lint
built up.
CHANGING THE LIGHT BULB
Only use light bulbs of a type as indicated on
the front of the machine (12V, 5W). They are
available at your authorized HUSQVARNA
VIKINGĀ® dealer.
Turn off the main switch.
1. Place the light bulb remover with the
deep hole, marked OUT, around the bulb.
Do not turn the bulb, just pull it out to
remove it.
2. When inserting a new light bulb place the
remover with the shallow hole, marked
IN, around the new bulb. Insert the new
bulb by pushing it up.
5
CARE OF YOUR MACHINE
To Next Page
Loading...
