ENNO
27
SVDASLSKTRHUSRHRBGUKETMKAZ
0478 403 9800 H - EN
When replacing the work tools (hoes),
ensure that the correct hoe type and hoe
combination are installed – only those
versions approved by VIKING are
permitted.
4.8 Storage for prolonged periods
without operation
Allow the engine to cool before storing the
machine in an enclosed space.
Store the machine with empty fuel tank
and the fuel reserve in a lockable and well-
ventilated room.
Ensure that the machine is protected from
unauthorised use (e.g. by children).
Never store the machine with petrol in the
tank inside a building. The resulting petrol
fumes could come into contact with naked
flames or sparks and could be ignited.
If the tank has to be emptied (e.g.
immobilisation before the winter break),
the fuel tank must be emptied out of doors
only (empty the tank by running the
engine, for example).
Thoroughly clean the machine before
storage (e.g. winter break).
Only store the machine with the spark plug
socket disconnected.
Store the machine in good operational
condition.
Allow the machine to cool down
completely before covering it.
4.9 Disposal
Waste products such as used engine oil or
fuel, used lubricants, filters, batteries and
similar wearing parts can be harmful to
people, animals and the environment, and
must consequently be disposed of
properly.
Consult your recycling centre or your
specialist dealer for information on the
proper disposal of waste products. VIKING
recommends VIKING specialist dealers.
Ensure that old machines are properly
disposed of. Read the information in the
"Environmental protection" section.
(Ö 14.)
HB 445:
For safety reasons, the release lever must
be pressed before actuation of the self-
propulsion lever. This prevents inadvertent
actuation of the self-propulsion lever.
5. Description of symbols
Caution: –
Risk of injury!
Read and follow the instruc-
tion manual and the safety
instructions before initial
use.
Rotating tools: Keep your
hands and feet away from
rotating tools. Only operate
with protective covers.
Maintain a safety
distance.
Detach the spark plug
socket before performing
any maintenance and clean-
ing operations.
Ташев-Галвинг ООД
www.tashev-galving.com
To Next Page
Loading...
