To Next PageTo Next PageWhat causes a Viking Oven bake element to stop working?
If the bake element in your Viking oven isn't working, the problem might be defective oven wiring, a faulty bake element, or an issue with the relay board. Repair or replace the wiring. Test the bake element. Verify the relay operation, wiring, and inputs.
How to fix a Viking Oven when the broil element is inoperable?
If the broil element in your Viking oven isn't working, it could be due to defective oven wiring, a faulty broil element, or a problem with the relay board. Repair or replace the wiring. Test the broil element. Verify the relay operation, wiring, and inputs.
Viking Oven: no self-clean, door won't lock, but bake and broil work?
If your Viking oven won't self-clean, but bake and broil work, the oven lights are on, the door won't lock, and the clean indicator light is off, the issue might be an open door latch motor, an out-of-calibration selector or thermostat, or an open relay. Confirm resistance. Replace the selector. Replace the thermostat. Replace the relay board.
General| Width | 30 in |
|---|---|
| Fuel Type | Electric |
| Self-Cleaning | Yes |
| Convection | Yes |
| Interior Light | Yes |
| Control Type | Electronic |
Explains safety alert symbols, DANGER, WARNING, CAUTION terms.
Guidelines for safe operation and detailed electrical specifications.
Details on control panel buttons, timers, and temperature controls.
Guide on how to access the diagnostic test mode and view software versions.
Guides for diagnosing and resolving operational problems.
Table of fail codes, detection, actions, and clearance procedures.
