Villager Villy 3740 E - Symbols and Icons; Symbols on the Equipment

6
Noise and vibration values have been determined according to the standards and
regulations mentioned in the declaration of conformity.
The stated vibration emission value was measured in accordance with a standard testing
procedure and may be used to compare one power tool to another.
The stated vibration emission value may also be used for a preliminary exposure
assessment.
Warning: The vibration emission value may differ during actual use of the power
tool from the stated value depending on the manner in which the power tool is
used.
Try to keep the exposure to vibrations as low as possible. Examples of measures
to reduce vibration exposure are the wearing of gloves when using the tool and
limiting the working hours. For this purpose all parts of the operating cycle have
to be considered (for example, times when the electric tool is switched off and
times when it is switched on but running without any load).
SYMBOLS AND ICONS
Symbols on the equipment:
Caution!
Read the operating instructions carefully.
Wear ear and eye protection.
Wear sturdy, non-slip footwear.
Risk of injury from parts being thrown up.
Keep nearby people away from the appliance.