17
• Check the device before each use for obvious defects such as loose, worn or damaged
parts. Ensure that all nuts, bolts and screws are firmly in place.
• Check the covers and protective devices for damage and correct fit. Replace these if
necessary.
Replacing blades
If the blade is blunt, it can be re-sharpened by a specialist company. If the blade is
damaged or unbalanced, it must be replaced.
1. Turn the machine over.
2. Use firm gloves and keep hold of the blade (22). Use a spanner to turn the blade bolt
(23) counter-clockwise from the motor spindle (24).
3. Reassemble the new blade (22) in reverse order. Make sure that the blade (22) is
positioned correctly (see illustration ) and that the blade bolt (23) is tightened.
Storage
Release the tightening levers (2+5) and fold the upper bar (1) and the lower bar (3)
together so that the device takes up less space. Make sure not to pinch the machine
cables while doing this.
• Store the device in a dry place out of reach of children.
• Give the motor time to cool off before you store the device in an enclosed space.
• Remove the rechargeable battery before storing the device for a long period of time
(e.g. winter storage).
We are not liable for damage cause by our devices if this is caused by improper repair, the
use of non-original parts or incorrect use.
Disposal/environmental protection
Take out the battery from the device and dispose of the battery, device,
accessories and packaging material in dedicated locations where they will be
treated and recycled in accordance with environmental protection standards.
The device is not a community waste.
Do not dispose of batteries together with other community waste and do not
throw them into fire (danger of explosion) or water. The batteries may harm
the environment and human health - in case of leakage of hazardous liquids or
vapors.
To Next Page
Loading...
