Villager Villy 3740 E - Maintenance and Storage; Electrical Safety

11
- If the apparatus starts to vibrate in an unusual way (check immediately).
Maintenance and Storage
• Give the motor time to cool off before you store the device in an enclosed space.
• During maintenance of the cutting blades, be aware of the fact that even if the power
supply is switched off, the cutting blades can be set into motion.
• Make sure that all nuts, bolts and screws are properly tightened, and that the device is
in safe working order.
• Do not try to repair the device by yourself unless you have professional training. All
work not specified in these operating instructions may only be carried out by customer
service centres authorised by us.
• Store the device in a dry place and out of reach of children.
• Handle your device with care. Keep the tools sharpened and clean in order to be able to
work better and safer. Follow the maintenance instructions.
• Wear safety gloves when replacing the cutting equipment.
• Check the grass collection unit regularly for wear and tear and deformation. Replace
worn or damaged parts in the interests of safety. When setting up the blades, take care
that your fingers do not become caught between the rotating blades and stationary
parts of the machine.
• Ensure that only replacement cutting tools approved by the manufacturer are used.
Electrical Safety
• The plug of the charger must fit into the socket. The plug must not be modified in any
way. Do not use any adapter plugs together with electric tools that have a protective
earth. Unmodified plugs and matching sockets reduce the risk of electric shock.
• Avoid body contact with earthed surfaces such as pipes, radiators, cookers and
refrigerators. There is an increased risk of electric shock if your body is earthed.
• Do not expose electric tools to rain or wet conditions. The penetration of water into an
electric tool increases the risk of electric shock.
Attention! Observe the safety information in the operating instructions for
your rechargeable battery.
Assembly
• Only carry out work that you know you are capable of.
• If in doubt, consult an expert or our service centre directly.