Villager Villy 3740 E - Troubleshooting

18
Trouble Shooting
Problem
Possible Cause
Fault Fixing
Appliance doesn't start
Rechargeable battery ( 9)
discharged.
Check the charge status, charge
rechargeable battery (observe
the separate operating
instructions for the battery and
charger).
Rechargeable battery ( 9)
not inserted.
Insert rechargeable battery
(observe the separate operating
instructions for the battery and
charger).
Defective release button (
16) or start lever
( 17)
Repair by customer services.
Defective motor.
Grass too long.
Set a greater cut height. Lift the
front wheels slightly by pressing
down on the bow- type handle (
1).
Motor stops
Blockage by foreign object.
Remove the foreign object.
Result unsatisfactory or
motor labours
Cut height too low.
Set a higher cut height.
Blade ( 22) blunt.
Have the blade sharpened or
replace it.
Blade area blocked.
Clean the equipment.
Blade ( 22) assembled
incorrectly.
Install the blade correctly.
Blade fails to turn
Blade ( 22) blocked by
grass.
Remove the grass .
Blade screw ( 23) loose.
Tighten the blade screw.
Strange noises, rattling or
vibrations
Blade screw ( 23) loose.
Tighten the blade screw.
Blade ( 22) damaged.
Replace the blade.