Vinten Protouch Pro-6HDV System - Page 13

13
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Illuminated levelling bubble
6 To enable the head to be levelled, an illuminated levelling bubble (11) is fitted to the rear of the head.
When the switch (13) is pressed, the bubble will be illuminated for approximately 15 seconds. The battery for
the illuminated bubble is contained in a illumination module (12). The switch (13) will illuminate when the
battery needs replacing.
Fig 1.1 Pro-6
HDV
Pan and Tilt Head
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)(10)(11)(13)(14)
(15)
(16)
(18)
(19)
(17)
(12)