Vinten Protouch Pro-6HDV System - Page 53

53
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.3 Pro-6
HDV
Pan and Tilt Head - RH Side Plate and Balance Assembly
Item
No.
Part
No. Nomenclature Qty
1 RV4018-2002 Assembly, right hand side housing 1
1.1 RV4018-2012 Assembly, balance knob 1
1.2 Plug, balance knob 1
1.3 Screw, countersunk, socket, M4 x 8 mm long 1
1.4 Balance knob 1
1.5 Needle roller 2
1.6 Cam, balance selection 1
1.7 Ball, steel, 5mm dia. 1
1.8 Spring, balance selector detent 1
1.9 Right hand side housing 1
1.10 Spring, balance selector pin 2
1.11 Sleeve, tilt bearing 1
1.12 Pin, balance selection 2
2 R503,322 Assembly, balance springs 1
2.1 Shim washer, spring separator 2
2.2 Balance spring 3
2.3 Spring cup, inner 1
2.4 Shim washer, spring cup 2
2.5 Spring cup, outer 1
2.6 Liner strip, torsion spring 1
3 R503,310 Assembly, centre housing 1
3.1 Spring clip, level bubble 1
3.2 Sleeve, tilt bearing 1
3.3 Assembly, centre housing mechanism 1
3.4 Level bubble 1
3.5 Sleeve, pan bearing 1
3.6 Sleeve, tilt brake 1
4 PRO6LV Assembly, pan bar 1