Vinten Protouch Pro-6HDV System - Page 57

57
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.5 Pro-6
HDV
Pan and Tilt Head - LH Side Plate and Tilt Brake
Item
No.
Part
No. Nomenclature Qty
1 R501,60 Arm, tilt drag adjustment 1
2 R503,310 Assembly, centre housing 1
2.1 Spring clip, level bubble 1
2.2 Level bubble 1
2.3 Sleeve, tilt bearing 1
Assembly, centre housing mechanism, consisting of: 1
2.4 Centre housing mechanism 1
2.5 Tilt drag shaft 1
2.6 Tilt brake shaft 1
2.7 Sleeve, pan bearing 1
2.8 Sleeve, tilt brake 1
3 R501,55 Assembly, tilt drag 1
3.1 Screw, cap head, socket, M 5 x 16 mm long 2
3.2 Shoe, drag disc adjustment 2
3.3 Spring, drag 2
3.4 Washer, plain, M5 2
3.5 Drag disc, adjustable 1
3.6 Drag disc, fixed 1
R116,23 Drag fluid, Optalus A0 140, 4.5 grams 1
4 RV4018-2000 Assembly, LH side housing 1
4.1 Wave washer, 14 mm ID x 21.8 mm OD x 1.6 mm thick 1
4.2 Friction ring, tilt brake 1
4.3 LH side housing 1
4.4 Sleeve, tilt brake 1
4.5 Washer, large, plain, M 6 1
5 R503,399 Assembly, tilt brake 1
5.1 Bearing, thrust 1
5.2 Insert, tilt brake 1
5.3 Lock ring, M 16 1
5.4 RV4018-2015 Assembly, tilt brake lever 1
5.5 Tilt brake lever 1