63
Contents
Previous
Page
First
Page
Next
Page
Previous
View
NOTE: The design of the bottom clamp has been modified
At Serial No. 03515, the shaft was fitted with a locking thread insert and the 2 x M5
grubscrews, were changed to 1 x M5 x 10 mm
Earlier tripods - two M5 grubscrews
17 3770-213 Washer-Lower clamp 1
19 3770-17 Clamp cam follower 1
20 3880-17 Lower clamp cam assembly 1
23 3770-229 Bottom Clamp Knob (Two Stops) 1
24 M601-010 Washer, shakeproof, internal, M5 1
25 M006-515 Screw, button head, socket, M5 x 8 mm long 1
29 3770-231 Bottom Clamp Shaft (M5) 1
30 M006-814 Screw, grub, flat point, socket head, M5 x 5 mm long 2
Fig 6.7 Leg Assembly (3819-11) (Cont)
Item
No.
Part
No. Item Qty
To Next Page
Loading...
