65
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.8 Floor Spreader (3818-3)
Item
No.
Part
No. Nomenclature Qty
1 3313-219 Split ring 1
2 3363-201 Centre moulding 1
3 3313-211 Hinge pin 3
4 M701-054 'E'-Clip, crescent ring (“e”-clip variation), 4 mm shaft dia. x 0.40 mm
thick
3
5 3363-202 Leg moulding inner (female) 3
6 3313-214 Friction pad 3
7 3313-213 Clamp stud 3
8 3363-203 Leg moulding outer (male) 3
3363-901SP Foot assembly (spares) - black, comprising one each of: 3
9 3313-218 Foot hinge pin 3
10 3313-212 Foot pad 3
11 3363-215 Foot support moulding 3
12 3313-216 Strap 3
13 L803-002 Pin, mills, 1/16 in. dia. x 1/4 in. long, gp2 6
14 M600-020 Washer, form “c”, large, 20.5/21 mm ID x 8.4/8.7 mm OD x 1.4/1.8 mm
thick
3
15 3313-204 Clamp knob moulding 3
16 M500-081 Nut, M5, standard (hex), full 3
To Next Page
Loading...
