32 33
• Loop Recording
: 1 / 2 / 3 / 5 / 10 Minutes.
Recording will begin automatically after powering on
with a microSD card in the device. Each recorded file is
one minute long as a default and the old footage will be
replaced when microSD card storage is full.
• Time-lapse Recording
: Off / 1 / 2 / 3 / 5 / 10 fps.
Record video from frames captured at specific time
intervals to conserve memory and reduce the time it
takes to review video. The default is off.
• Exposure Value (Front / Rear):
Adjusting the value of the EV (Exposure Value) properly
can create better footage under different light sources.
It ranges from -2.0 to +2.0. You can adjust the EV for the
front and rear cameras separately. The default is set at
0.0.
• HDR (Front / Rear)
:
Off / On / Auto HDR Timer. You can set HDR for the front
and rear cameras separately. The default setting is Off.
The multi-exposure HDR technique helps automatically
balance the lighting in over bright and over dark areas
to avoid over exposure issues.
• G-Sensor
:
The G-sensor measures shock forces and locks the
video recorded at the time. The settings from “low to
high” determine the amount of force needed to lock
the file from being overwritten. We recommend that
you set it at low.
• Stamp:
Choose to imprint the information on the recorded video.
Date Stamp / GPS Speed Stamp / GPS Coordinates
Stamp / Custom Stamp / License Plate Stamp / Logo
Stamp / Brand Model Stamp / Resolution Stamp / Stamp
Text Color.
• Record Audio
:
Turn on and off the microphone. This can also be
changed during recording by pressing the
microphone button [ ].
• Parking Recording
Parking Mode:
There are 3 options under parking mode:
① Auto Event Detection
The camera will automatically record a video
sequence while a moving object is detected during
parking. It will stop recording without new movements.
② Time Lapse Recording
Time lapse records a video at low frames at 1 / 2 / 3 /
5 / 10 fps, it keeps recording continuously without
audio recorded.
Timelapse 1 fps mode supports SNV (Super Night
Vision) option, which can provide brighter and clearer
night vision in extreme low light conditions, with lower
power consumption.
③ Low Bitrate Recording
This mode uses low bitrate to record video and audio,
and uses small file sizes for continuous recording.
Note:
When the front camera HDR is set to 'Auto', the rear
camera HDR will then display 'Auto' option. The HDR
Timer follows the front camera's and cannot be
adjusted individually.
Note:
1. We recommend that you buy VIOFO HK4 ACC hardwire
kit cable for parking mode recording.
Note:
You can change the stamp text color in the video file to
white/yellow/cyan/golden.
To Next Page
Loading...
