File Lists
38 39
• GPS:
Turn on / off GPS logger. A GPS module is used to
include the location data in the recorded videos. If
disabled, your camera will no longer measure your
speed and position; nor synchronize the time / date.
(Only available when connecting with GPS signal)
Please use “Dashcam Viewer” to playback videos and
to visualize your position and speed on your computer.
• Speed Units:
Kilometer per hour (KMH) and miles per hour (MPH) are
available for speed units.
• Screen Saver:
The screen goes black by default after 1minute while
recording. You can set it by adjusting different time
intervals on menu.
• Video Out OSD: Off / On.
When connecting the camera to an external display
via the Micro HDMI port, the display can shows
dashcam's live recording in real time. You can turn
off/on the on-screen display of icon information.
• Frequency:
Set it to minimize flickering and banding in the recorded
video.
• Language:
Display language setting. (English, Traditional Chinese,
French, etc.)
• Format: MicroSD Card / External SSD.
You can choose to delete all data on the microSD card
or external SSD.
Note:
Once you format the card or SSD, all information will
be deleted and unrecoverable. Make sure to back
up all files that you needed before formatting.
• Format Reminder: Off / 15 / 30 / 60 Days.
Set regular reminders for formatting the memory card.
• Video: Video File Lists.
• Photo: Photo File Lists.
• Default Setting: Restore device to factory settings.
• Version: Check the current firmware version of the camera.
To Next Page
