36 37
- Take Photo
- Turn On Audio
- Turn On Screen
- Turn On Wi-Fi
- Show Front Camera
- Show Both Cameras
- Video Start
- Turn Off Audio
- Turn Off Screen
- Turn Off Wi-Fi
- Show Rear Camera
- Lock The Video
• Time Zone: Set the current time zone for GPS time and
date calibration.
• Date/Time:
Set system date / time.
• Daylight Saving:
Off / United States. Set US daylight saving on or off.
• Time Format:
24H / 12H. Set system time format.
• Boot Delay:
The camera will boot seconds delay when powered
on. The settings are Off / 5 Seconds / 10 Seconds.
• LED:
All Off / All On / Power LED Only.
You can enable / disable the LED lights.
Note:
The time zone must be manually adjusted for daylight
savings, except for the United States regions.
• Parking Mode LED:
All Off / All On / Power LED Only.
You can enable / disable the LED lights under Parking
Mode.
• Voice Notification:
Turn on / off the voice notification.
• Voice Notification Volume: Low / Medium / High
Adjust the volume of the voice notification.
• Beep Sound:
Off / Only Keytone / Only Boot Sound / All.
You can enable/disable the button and startup sounds.
• Manage SSD Storage:
You can choose to backup MicroSD card files (Last 24
hours/7 days/All) into SSD, or delete external SSD files.
• Video Storage:
MicroSD Card / External SSD.
You can choose to store videos and photos on these two
different storage devices.
• Voice Command:
Voice recognition commands. You can issue different
voice commands to remote control the camera, like:
Note:
Voice command language should be consistent with
dashcam system language in following four options:
English, Chinese, Russian, and Japanese. For all other
dashcam language systems, English is the only
language to trigger voice control function.
• Voice Control:
Turn off / on the voice control.
When Voice Control is turned on, you can control the
camera with spoken commands, using your voice to
take photos, turn on/off Wi-Fi, start recording, and more.