LED Indicators
4
LED light LED Status Behavior
Solid Red
Flashing Red
Flashing Red for 5 Times
Solid Red (3s) &
Flashing Blue (1s) Alternately
Recording & Wi-Fi Disabled
Not Recording / Recording Error
Video Protected
Recording Error / Memory
Card Format Reminder
Memory Card Formatted
Successfully
Both Solid Blue
Lasting 2 Seconds
Both Flashing Red
Audio Recording On
Audio Recording Off
Recording & Wi-Fi Connected
Solid Red
Red Off
Solid Blue
Recording &
Wi-Fi Waiting Connecting
Solid Blue (3s) &
Flashing Red (1s) Alternately
Wi-Fi Connected &
Recording Paused by App End
REC
MIC
REC+MIC
Buttons Behavior
Buttons and Icons
Press once to lock the file being recorded
Long press for 5 seconds to turn on / off Wi-Fi
Press once to disable / enable audio recording
Long press for at least 8 seconds to format the card
Press 5 times consecutively to reset the dashcam
5
Insert the memory card
Ensure the camera is turned
off. Hold the memory card
in the orientation shown,
slide it into the card slot
until you hear a click.
Remove the memory card
Ensure that the camera is turned off, and then push the edge of
the memory card with your fingernail. The card will spring out far
enough to be removed.
Note:
• The microSD card is sold separately. The microSD card must
have a Class-10 or UHS-I rating and the capacity is up to 512GB.
• We recommend that you buy VIOFO industrial grade microSD
card for extended endurance, excellent performance and
reliability.
• Memory card must be formatted before first use. Please format
the card on a computer or in the camera to the exFAT or FAT32
file system.
• Please unplug the power cable before inserting or removing
the microSD card.
• Inserting or removing the microSD card while recording may
destroy the files.
1. Insert / Remove the Memory Card
Installation
Format the memory card
Memory card must be formatted before first use.
To Next Page
Loading...
