4 Software
4.1 Handling with VIPA data handling blocks 4-2
4.1.1 Important advice 4-2
4.1.2 Overview of parameterizing possibilities 4-2
4.1.3 Changing the standard parameters 4-4
4.1.4 Selection of function 4-10
4.1.5 Data handling without a protocol and procedure 4-12
4.1.6 Data handling with procedure STX/ETX 4-18
4.1.7 Handling with procedure 3964(R) 4-20
4.1.8 Handling with prozedure 3964(R) with RK512 4-41
4.2 Application of interfaces without data handling blocks 4-84
4.2.1 Address allocation 4-84
4.2.2 Interface channel 4-85
4.2.3 Parameter channel 4-87
4.2.4 Acknowledgement and error code 4-88
4.2.5 PLC interface parameter channel 4-89
To Next Page
Loading...
