5 Startup
5.1 Startup procedure 5-1
5.2 Presetting 5-2
5.2.1 Mounting place in PLC-115U 5-2
5.2.2 Mounting places in PLC-135U 5-3
5.2.3 Mounting place in PLC-150U 5-4
5.2.4 Mounting place in PLC-155U 5-5
5.2.5 Mounting place in EG-185U 5-6
5.2.6 Mounting places in PLC-188U 5-7
5.2.7 Setting the address with DIL switches S1 and S2 5-8
5.2.8 Plug connectors J6, J11 and J12 5-10
5.2.9 Voltage supply of the module 5-12
5.3 Software installation of VIPA’s data handling blocks 5-15
5.4 Startup response 5-17
5.5 Error diagnosis 5-18
5.5.1 Errors in serial communication 5-18
5.5.2 Application of the diagnostic interface 5-19
5.6 Examples 5-21
5.6.1 STX/ETX 5-21
5.6.2 3964R 5-25
5.6.3 3964R with RK512 5-28
5.7 Structure guidelines 5-31
5.7.1 What does EMC mean? 5-31
5.7.2 Overview of the possible effects of interferences 5-31
5.7.3 The most important basic rules to guarantee EMC 5-32
5.7.4 Screening of cables 5-33
To Next Page
Loading...
