Manual BG41/BG42/BG43 Startup
Rev. 99/49 5-15
5.3 Software installation of VIPA’s data handling blocks
The data handling blocks which can be acquired from VIPA are found in a packed form on the disk
(Order-No.VIPA SSM-SW433).
To install these data handling blocks, please follow the following steps, which may also be found on
the disk in the file "Read.me".
•= Draw up an index on your data carrier (e.g. on drive C:) with the command
MKDIR C:\SW433
•= Change in that index C:\SW433 with the command
CD C:\SW433
•= Copy the files from your disk drive (e.g. from drive A:) into this index with the command
COPY A:\*.* C:
•= Unpack the files with the command
SW433V55
The files can now be found in unpacked form in the index SW433 on your drive C. All available
data handling blocks will be descibed briefly below.
Name of File Description
130wb@st.s5d Data handling blocks for a clock, ASCII protocol, counter and STX/ETX
protocol for 130wb.
135r@@st.s5d Data handling blocks for a clock, ASCII protocol, counter, 3964(R) with
RK512 and STX/ETX protocol for R processor.
135s@@st.s5d Data handling blocks for a clock, ASCII protocol, counter and STX/ETX
protocol for S processor.
150ak@st.s5d Data handling blocks for a clock, ASCII protocol, counter and STX/ETX
protocol for 150ak.
150u@@st.s5d Data handling blocks for a clock, ASCII protocol, counter and STX/ETX
protocol for CPU 150U.
948946st.s5d Data handling blocks for a clock, ASCII protocol, counter, 3964(R), 3964(R)
with RK512, recording function and STX/ETX protocol for CPU 948, CPU
946.
ag115@st.s5d Data handling blocks for a clock, ASCII protocol, counter, 3964(R), 3964(R)
with RK512, recording function and STX/ETX protocol for CPU 941/B -
944/B.
cpu928st.s5d Data handling blocks for a clock, ASCII protocol, counter, 3964(R), 3964(R)
with RK512, recording function and STX/ETX protocol for CPU 928, CPU
928B.
cpu945st.s5d Data handling blocks for a clock, ASCII protocol, counter, 3964(R), 3964(R)
with RK512, recording function and STX/ETX protocol for CPU 945.