VIPA SSM-BG41 - Fig. 4-34: Function Selection (Protocols and Procedures) with Command 5, Example3

Manual BG41/BG42/BG43 Software
Rev. 99/49 4-103
Example 2: Channel 2 should be operated without a protocol/procedure.
Fig. 4-33: Function selection (protocols and procedures) with command 5, example 2
Two acknowledgement bytes are returned.
Example 3: Channel 3 should be operated with an STX/ETX protocol.
Fig. 4-34: Function selection (protocols and procedures) with command 5, example3
Two acknowledgement bytes are returned.