Handling with VIPA data handling blocks Manual BG41/BG42/BG43
4-58 Rev. 99/49
Beispiel: FB20 (SYNCHRON)
SPA FB20
NAME :SYNCHRON
ADRE :KH F080 Building block’s address as set with DIL
switches
SSNR :KF +1 Interface number 1,2 (3)
BAUD :KF +10 Baud rate code 1...11 (10 = 9600baud)
FORM :KM 00000001 11111100 Transmission format:8bit,even parity,2 stop
PRIO :KF +0 0=low, 1=high priority
BLOC :KF +128 Block size in bytes (always even-numbered!)
PAFE :MB 5 Byte for the output of an error number
To Next Page
Loading...
