Handling with VIPA data handling blocks Manual BG41/BG42/BG43
4-76 Rev. 99/49
Example: FB25, (FETCH) by direct parametrizing
:
:SPA FB25
NAME :FETCH
ADRE : KH F080 Address set with DIL switches
SSNR : KF +1 Interface number 1,2 (3)
A-NR : KF +4 Order number (1...255)
QTYP : KC MB Source type in foreign PLC
QDBN : KY 0,0 DB no. by source type DB in foreign PLC
QBWN : KY 0,100 From data in source type in foreign PLC
BWAN : KF 10 Amount of data to be sent (Bytes/words depending on source
type)
ZTYP : KC DB Target type in own PLC
ZDBN : KY 0,5 DB no. by target area DB in own PLC
ZBWN : KY 0,20 Telegram filed from DB 20 in target in own PLC
KOOR : KY 20.3 Coordination flag in foreign PLC
ANZW : MW 30 The display word is filed in this word
PAFE : MB 32 Error messages in relation to parametrizing are filed in this
byte
NEUS : M 1.0 New start bit
To Next Page
Loading...
