Handling with VIPA data handling blocks Manual BG41/BG42/BG43
4-80 Rev. 99/49
PAFE
Contains a byte for issuing an error number. PAFE provides the value 0, the
parameter details are therefore correct. A value unequal to 0 represents an error.
PAFE Error codes
0 No Error
11 Invalid address ADRE
12 Invalid interface number SSNR
16 Undefined answer received from the interface building block
NEUS
As long as the bit is at the signal stand is at 1, the processing of the function
block is discontinued.
The data handling block examines the parametrized values at the following limits:
ADRE F080...F1FC
SSNR 1...2 (3)
ANZW Not examined
PAFE Not examined
NEUS Not examined
Example: FB24 (RECEIVE-ALL):
:SPA FB24
NAME :RECEIVE-ALL
ADRE : KH F080 Address set with DIL switches
SSNR : KF +1 Interface number 1,2 (3)
ANZW : MW 30 The display word is filed in this word
PAFE : MB 32 Error messages in relation to parametrizing are filed in this
byte
NEUS : M 1.0 New start bit
To Next Page
Loading...
