Functional description and allocation of terminal pins Manual BG41/BG42/BG43
3-46 Rev. 99/49
Example:
a) All three counters should be operated with mode 1.
b) If the mode is programmed, the momentary counter reading should be read.
The following bytes are to be transferred:
a)
b)
From the building block 6 bytes can be read through the corresponding channel, whereby the
counter’s high-order byte is always in first place.
xx high-order byte
Counter state Counter 1
yy low-order byte
৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹
xx high-order byte
Counter state Counter 2
yy low order byte
৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹৹
xx high-order byte
Counter state Counter 3
yy low-order byte
To Next Page
Loading...
