VIPA SSM-BG41 - Page 91

Manual BG41/BG42/BG43 Interface modules
Rev. 99/49 3-63
SPA FB 55
NAME #STAT_IN
ADR =KF +128 Base address of the SSM, PY128
K/EI =KY 1,2 Channel number / input, output number
WERT =MW 30 Returning of the status bits
FEHL =MB 18 Error byte
If the min. or max. value falls down or up, a corresponding status bit is set.
SPB FB 56
NAME #MIN/MAX
ADR =KF +128 Base address of the SSM, PY128
K/OU =KY 1,1 Channel number / input, output number
MIN =MW 32 Smallest valid value
MAX =MW 34 Largest valid value
FEHL =MB 17 Error byte
The FB can be loaded in start OB or bit-controlled in OB1.