EasyManua.ls Logo

Viper 7900 - multi-level arming

Viper 7900
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
© 2006 directed elect r o n i csall rights reser ved
multi-level arming
Multi-level arming allows you to choose the level of vehicle protection
each time the alarm is armed.
It is also a convenient way to avoid sensor triggers when parking in
environmentally questionable areas such as airports, construction
zones or during inclement weather.
After arming, if within 1 second the system receives arm signals from
the remote control it will chirp the siren and bypass selected zones for
each signal.
First

press: one chirp, the alarm is armed.
Second

press: two short, one long chirp, Zone 2 shock
sensor bypassed.
Third

press: three short, one long chirp, Zone 4 optional
sensor bypassed.
Fourth

press: four short, one long chirp, Zone 2 and 4
are bypassed.
Fifth
press: five short, one long chirp, ALL zones except
Zone 5 ignition are bypassed.
note: The selected zones will remain bypassed until the
next time the system receives an arm signal.

Other manuals for Viper 7900

Related product manuals