Viscount RD-70 - Creating and Managing Song Chains

SINGLE
SINGLE
SINGLE
PROGRAM
PROGRAM
PROGRAM
ERASE
ERASE
ERASE
TEMPO
TEMPO
TEMPO
SONG
SONG
SONG
ENTER
ENTER
ENTER
RANDOM
RANDOM
RANDOM
STANDBY
STANDBY
STANDBY
REPEAT
REPEAT
REPEAT
PROGRAM
PROGRAM
REW
REW
STOP
STOP
PLAY
PLAY
PAUSE
PAUSE
REC
REC
FF
FF
3.3Random Playback
*Itis possibletoplaybackallthesongs onadisk, orallthe songsincludedin a
chain,inrandomorder.
1)PressRND(therelativeLEDwilllightup),thenPLAY.
Randomplaybackofthesongson thedisk willbegin andcan beinterrupted by
pressingSTOP.
2) Actuate the PROG function (LED will light up) then follow procedure 1).
Randomplaybackoftheprogrammedsongs willbeginand canbeinterrupted
bypressingSTOP.
3.1Creating a CHAIN
PROGRAMMING
* The RD-70 can be programmed to automatically playback a series of songs
intheorderselectedbytheuser(CHAIN).
Theprocedureisdescribedbelow:
1) While holding ENTER, press the PROG button (the relative LED will start
flashing).
2)PresstheSONG<or>buttonstosetthenumberofthesongthatyouwant
toinclude.
3)ConfirmwithENTER.
4)Repeatpoints2)and3)foreachsongthat youwanttoprograminsequence
(maxpossiblenumberis99).
5) At the end of selection, press STOP (the PROG LED will remain on,
indicatingthattheprogramminghasbeenstoredinthememory).
6)PressPLAYtostartchainplayback.Thechaincanbestoppedatanytimeby
pressingSTOPorPAUSE.
* The chain programmingremainsstoredinthe memory even when the unit is
turnedoff.
Assubsequentprogrammingswillbeaddedontopreviousones,itisadvisable
to delete any chain already existing in the memory before programming
another.
Check the PROG LED in order to see whether the memory is free - the LED
shouldnotbeilluminated.
IftheLEDison,whileholdingERASEpressPROGtoclear.
N.B. The chain will not be able to work if a floppy disk other than the one
containingthesongsprogrammedinthechainisinsertedinthedrive.
If the chain is called up with the PROG button during normal playback of a
song,thechainwillbeginaftertheendofthesong.
3.2Deleting a CHAIN
