* This function enables the RD-70 to correctly resume playback from the
middleofasong.
* The function works by intercepting any PROGRAM CHANGES, CONTROL
CHANGES, etc. that may have been skipped by starting playback at a later
stageofthesong.
* If messages of this kind have been skipped, they will immediately be re-
transmittedtoensurecorrectplaybackpitchanddynamics.
*Toturnthisfunctiononoroff:
1)PressENTERandFF.
2)SelectON/OFFbypressingREWorFF.
3)PressENTERtoconfirm.
* This function enables the RD-70 to synchronize with any MIDI device
capableofreceiving/transmittingMIDICLOCKsignals.
*WhileholdingENTERbuttonpressTEMPO<.Nowwehavefouroptionscan
beselectedwithREWandFFbuttons:
1)"Aut"(automatic):theRD-70willnormally useitsowninternalclock,butif
it receives MIDI START and MIDI CLOCK messages from an external MIDI
deviceitwillautomaticallysynchronizewiththem.
2) "int" (internal): the RD-70 will only use its own internal clock. External
synchronizationmessageswillbeignored.
3) "in" (MIDI): the RD-70 will use only the MIDI CLOCK signal received at the
MIDIINport.
4) "rEt" (remote): the RD-70 will use its own internal clock, but START and
STOPcanbecontrolledfromanexternalMIDIdevice.
*PressENTERtoconfirmorSTOPtocancel
* The SOFT THRU function transforms the MIDI OUT connector into a MIDI
OUT/THRU connector so that, as well as transmitting data generated by the
RD-70,itcanalsore-transmitmessagesfromanexternalMIDIdevicereceived
atMIDIIN.
*Thisfunction canbeextremelyuseful incertaincasesasit allows theRD-70
to be incorporated into complex MIDI systems, while in others it may cause
problems as in certain types of connection it can produce "data loops" which
createerrorsinthemachine'scontroloftheMIDIcode.
Forthisreasonthefunctioncanbeturnedoffasfollows:
1)While holding ENTER, pressSONG<(currentstatus ofthefunctionwillbe
displayed-ON/OFF).
2)ChangestatusbypressingFForREW.
3)PressENTERtoconfirm.
6.1MIDI UPDATE Function
6.1MIDI UPDATE Function
6.3Synchronization
6.2SOFT THRU Function
MIDI
To Next Page
Loading...