* Data storage is carried out completely automatically DURING actual
recording. This is the fundamental characteristic of the "direct to disk"
read/writesystem used bythe RD-70 which uses the disk directly as the data
loadingandunloadingunitsinceitdoesnothavebuffermemorybanks(RAM).
* The RD-70 also organizes the recognition of songs on the disk, assigning
automaticprogressivenumberingtothem:eachsongisidentifiedbyanumber
higherthanthatofthelastsongidentifiedonthedisk.
* As the RD-70 has been designed to essentially read recordedsongs, it does
not have any specific functions for correcting material stored on the disk.
Therefore, if there are performance errors the only way to correct them is by
repeating the whole recording procedure after deleting the whole song. See
FLOPPY-DISK5.3forthedeletefunction.
4.3Storing
4.4Recording Errors
RECORDING
To Next Page
Loading...