28
Viscount Physis Organs Reference Manual
8.1 REGULATING THE VOLUME (VOLUME LEVEL function)
The volumes for each single stop can be adjusted in a range of -9 dB to +6 dB, and allows a perfect balance
of the overall sound of the organ.
Select the VOLUME LEVEL field, in the VOICES menu. The display will show the organ sections, select
the section that contains the voice you wish to adjust:
As usual, use the [FIELD S] and [FIELD T] and [ENTER] buttons to select the field on the display.
Another way of displaying and adjusting the volume immediately is to hold out the draw-stop (NOT in
models with electromechanical draw-stops) or hold down the rocker tab for a few moments in the voice on
position, while the cursor is on the VOLUME LEVEL field in the VOICES menu, or in the function itself.
The LED of the stop the volume of which is being adjusted will flash to prevent modification errors; the
stop will be on and can be played for better, quicker adjustment. Other stops can also be switched on to
assess the overall effect of the changes.
To quit the function and save the values press [EXIT]. The changes made will be automatically saved in the
current organ style.
8.2 REGULATING THE AUDIO PARAMETERS (EDIT PARAMETERS function)
Each organ voice can be customized with the sound generation parameters, that control the tone colour.
To view the screens containing the sound generation parameters of each individual voice, select the EDIT
PARAMETERS field in the VOICES menu:
3 manuals models 2 manuals models
4 manuals models
3 manuals models 2 manuals models4 manuals models
To Next Page
Loading...
Need help?
General
