66
Viscount Physis Organs Reference Manual
To manage a file, select it and press [ENTER]:
o COPY: copy the file from one memory unit to the other (USB to internal or the other way around). The
process is described in par. 11.4.
o RENAME: rename file, see par. 11.5.
o DELETE: delete file. See par.11.6
o LOAD: load a file to the work memory of the organ. See par. 11.2.
o SAVE: save again a file in the current memory unit. If a .CMB file is selected, this will be overwritten
with the current organ configurations. See par. 11.3.
NOTE
Load and Save functions are not available for .MID and .LST files.
11.2 LOADING ORGAN COMBINATIONS AND/OR SETTINGS (LOAD function)
The Physis organs can save the current configurations. The LOAD function allows to recall into the work
memory these configurations and combinations already saved to the mass storage memory (internal or external)
and therefore use them.
To load a file, select the LOAD field under the FILE MANAGEMENT menu:
Use the [FIELD ] and [FIELD ] buttons to select the file to load and press [ENTER], or [EXIT] to
cancel the operation. While loading, the display shows this screen:
To Next Page
Loading...
Need help?
General
