74
Viscount Physis Organs Reference Manual
Then arrange the pieces within the list (or confirm the previous programming):
To move a piece into a different position, locate the cursor on the relative field of the file with the
[FIELD ] and [FIELD ] buttons and use [VALUE +] to move the position forward or [VALUE -] to set
an earlier position. Finally, press [ENTER] to save the list or [EXIT] to return to the previous video page.
As for MIDI files, the first three characters can only be numbers.
To enter the name, use the [FIELD ] and [FIELD ] buttons to move the cursor and [VALUE +] and
[VALUE -] to select the character.
Press [ENTER] to confirm the name and proceed to save, or [EXIT] to return to the previous video page.
11.8 OPERATING SYSTEM VERSION (O.S. INFO function)
To check what release of the operating system is currently running in your instrument, select the O.S. INFO
field from the FILE MANAGEMENT menu. To check if there are updates and to install them, see
chap. 10.4.
The upper section of the screen shows the organ model and version (Europe, USA, UK, Standard, Custom
etc.) while the MODEL field shows the identification number of your organ.
NOTE
If you wish to rename .lst files saved to the USB stick using a computer, always make sure that the
names are shorter than 12 characters (either numbers or letters) and that all letters, included the
file extension, must be lower case.In add of this please pay attention to do not delete the first three
characters and the “_”.
To Next Page
Loading...
Need help?
General
