62
Viscount Physis Organs Reference Manual
3 manuals models 2 manuals models
4 manuals models
3 manuals models 2 manuals models
4 manuals models
The SECT (Section) column lists the organ section, and the associated Program Change and MSB and LSB
Bank Select messages are shown in the PG, MSB and LSB columns.
Please note that the MIDI messages of this screen are immediately sent to the corresponding section, and
also saved in the general, divisional and Tutti memories. To do so, select the Program Change and Bank
Select and fix the desired memory. This process might prove useful when, using an external expander, you
wish to combine a voice from this unit with other stops.
When a MIDI message is not necessary, cancel it by selecting the “---” value. To leave the screen and go back
to the UTILITY & MIDI menu press [EXIT].
REGULATING THE MIDI VELOCITY (PEDAL/KEYB. TOUCH function)
This function sets the velocity of the notes transmitted through MIDI [OUT] port, played with Orchestra
stops, for each section. This is the corresponding screen:
TRANSMISSISSION OF PROGRAM CHANGE AND BANK SELECT MESSAGES
(PROG. CHANGE SEND function)
Program Change (PG) MIDI messages can recall, in a connected unit, a particular sound or program (patch).
Thanks to this function you may select a desired voice from external module (such as an expander) connected
to the MIDI [OUT] port. You can also transmit Bank Select messages MSB (CC n. 0) and LSB (CC n.20) to
select stop banks from an external source.
Select the PROG. CHANGE SEND field under the UTILITY & MIDI menu, then press [ENTER]
For each section, set a fixed value (FIXED from 1 to 127) or three dynamic curves: SOFT, NORMAL or
HARD. Press [EXIT] to leave and save the settings.
To Next Page
Loading...
Need help?
General
