26 VISIONEER STROBE XP 200 SCANNER INSTALLATION GUIDE
3. From the Scanner drop-down list, select Visioneer Scan Manager.
4. In the “Scan what?” section, choose to scan a Document or
Photograph.
5. Click Settings to view and change the format for the scanned item’s
file name and the file type. The default file type for documents is
.pdf and the default for photographs is .jpg.
6. Use the Single page items check box as follows:
■ When the check box is selected, pages are scanned and placed on
the PaperPort desktop.
■ When the check box is not selected, pages are scanned but not
placed on the PaperPort desktop until you close the Scan
Manager and indicate the scanning job is finished.
7. Click the Scan button in the Scan pane.
The Visioneer Scan Manager opens. Use the Visioneer Scan
Manager to select scanning options and to start the scanner.
Scan pane
Click the Scan button to open
the Visioneer Scan Manager
To Next Page
Loading...
