4. System Status and Indications
14 D-304269 KP-250 PG2 User’s Guide
General Indications
The Ready/Not Ready, Alarm Memory, Trouble and Low Battery indications are provided via the indications in the
following table:
Indication What it Means Indication What it Means
KP-250 PG2 Volume up
KP-250 PG2 low battery.
Record a message
Communication failure: KP-250 PG2
is out of range of panel
PGM on
Memory / Alarm in partition or system
KP-250 PG2 Volume down
A message is waiting in the control
panel
Play a message
The system is in INSTALLER MODE
or USER SETTINGS
PGM off
Instructs the user to present the
proximity tag (at the position of this
indication).
PowerMaster Mute speaker
AC ON
Chime ON / OFF
Keypad Chime ON / OFF status
PGM control
System Trouble
Event log / enroll button
Escape
Instant
Previous
Partition selection
Info. / OK
Dialer to call telephone numbers (for
future use)
Next
AC failure
Discard / abort
To Next Page
Loading...
