Visonic KP-250 PG2 - Serial Number

6. System Configuration
D-304269 KP-250 PG2 User’s Guide 47
Additional Information (section B.16)
1
For detailed instructions on how to select the Setting Options – refer to section A.1 and section A.2.
2
The display shows the currently selected setting (indicated by a

symbol).
3
 indicates the lowest volume level and  indicates the highest.
4
You can now select another option in the User Settings menu (see section A.1 and section A.2), or quit
programming (see section A.3).
B.17 Serial Number
The SERIAL NUMBER menu enables reading the system serial number and similar data for support purposes only.
 Here you can read the system serial number and other relevant data.

Carefully read the section titled "Additional Information" according to the indicated references
1
etc – see table at
end of this section.
1.
SERIAL NUMBER
Enter the [USER SETTINGS] menu, select the [SERIAL NUMBER] option and
press .
1
2.
PRODUCT SN
0907030000.
Displays the control panel serial number.
3.
SW CAT & SN
JS702275 K18.022
Displays the control panel software version.
4.
LCD CAT SN
JS700421 v1.0.02
Displays the control panel keypad software version.
2
5.
PANEL ID
100005
Displays the control panel ID for PowerManage connectivity.
6.
PYTHON VERSION
FFFFFFFFF
Displays the GSM image transfer software version.
7.
EE CAT & SN
J-702271 K18.022
Displays the control panel default version.
8.
KP250 SW VER
01.00.09
Displays the KP-250 PG2 keypad software version.