APPENDIX C: Glossary
62 D-304269 KP-250 PG2 User’s Guide
level of the alarm system.
Zone: A zone is an area within the protected site under supervision of a specific detector. During programming, the installer
allows the control panel to learn the detector’s identity code and links it to the desired zone. Since the zone is distinguished
by number and name, the control panel can report the zone status to the user and register in its memory all the events
reported by the zone detector. Instant and delay zones are “on watch” only when the control panel is armed, and other (24-
hour) zones are “on watch” regardless of whether the system is armed or not.
To Next Page
Loading...
