Visonic PowerMaster-10 G2 User Guide

SPEECH AND SOUND CONTROL
D-304829 PowerMaster-10/30 G2 User's Guide 15
Once the last of the boxes disappears, RECORDING ENDED will be displayed.
When you release the button, the display will revert to the normal status-displaying mode, but will also indicate
that a message is waiting. For example:
READY HH:MM
(alternating)
READY MSG
To check your own message, listen to it within one minute from the end of recording (see the next section -
Message Playback). This way the MSG indication will not be erased.
Message Playback
To listen to a message left by another user of the system:
Click and listen. PLAY will be displayed and the message will be played back over the built-in
loudspeaker. When the playback ends, the display will revert to the normal status-displaying mode. If more than
1 minute elapsed after recording, the MSG indication will disappear.

Visonic PowerMaster-10 G2 Specifications

General

Model	PowerMaster-10 G2
Category	Security System
Wireless Technology	PowerG
Remote Control	Yes
Event Log	1000 events
Communication	GSM, PSTN, IP
Frequency	868 MHz
Type	Wireless
Operating Temperature	-10°C to +55°C
Humidity	Up to 85% non-condensing