Visonic PowerMaster-10 G2 User Guide

INTRODUCTION
6 D-304829 PowerMaster-10/30 G2 User's Guide
No. Indication Function
3
Arm (Red): Lights when the system is in the armed state.
4
Chime (Green): Chime zones will chime when disturbed (see Chapter 2).
5
Trouble (Orange): Lights when the system is in a state of trouble (see Chapter 5).
Control Keys
No. Indication Function
7
NEXT: Advance from item to item within a given menu.
8
BACK: Move one step back within a given menu.
9
OK: Review status messages one by one and also select a displayed option.
Arming Keys
No. Indication Function
12
AWAY: Arming when nobody is at home
10
HOME: Arming when people remain at home.
14
INSTANT: Canceling the entry delay upon arming (AWAY or HOME)
11
DISARM / OFF: Disarming the system and stopping alarms
16
PARTITION: Partition selection
Other Keys
No. Indication Function
13
Chime ON/OFF
15
Reviewing the event log
17
Emergency (hold for 2 sec.)
18
Fire (hold for 2 sec.)
19
+
Press both buttons simultaneously for panic alarm
20
PGM control
21
PGM output OFF
22
PGM output ON
23
Volume up *
24
Volume down *
25
Record message *
26
Play message *
27
Mute speaker * / **
* May not be functional on all versions of PowerMaster-30 G2.
** The Mute Speaker button is active only if the "Set Voice Option" function is enabled (see Chapter 6, section B.14).
1
1
Refers to PowerMaster-30 G2 with voice option only

Visonic PowerMaster-10 G2 Specifications

General

Model	PowerMaster-10 G2
Category	Security System
Wireless Technology	PowerG
Remote Control	Yes
Event Log	1000 events
Communication	GSM, PSTN, IP
Frequency	868 MHz
Type	Wireless
Operating Temperature	-10°C to +55°C
Humidity	Up to 85% non-condensing