Visonic PowerMaster-10 G2 - 5.6.7 Configuring Upload; Download Remote Programming Access Permission

EVENT REPORTING & CONTROL BY TELEPHONE AND SMS
52 D-304829 PowerMaster-10/30 G2 User's Guide
Remote Control by SMS
Note: This feature is not to be not to be enabled in UL Listed product.
PowerMaster system with GSM unit can respond to SMS commands from any cellular telephone (a detailed
SMS message sending process is described in the cellular telephone user’s guide).
The various SMS commands are detailed in the following table.
In this table, “<code>” means a 4-digit user code and simply means blank space (see Note).
SMS Command List
Command Individual Partition SMS Format All Partitions SMS format
1 Arm AWAY “AWAY <code>”
or
“AW <code>”
“P# AWAY <code>”
or
“P# AW <code>”
2 Arm AWAY instant
“AWAY INST <code>”
or
“AWI <code>”
“P# AWAY INST <code>”
or
“P# AWI <code>”
3 Arm AWAY
Latchkey
“LATCHKEY <code>”
or
“LK <code>”
“P# LATCHKEY <code>”
or
“P# LK <code>”
4 Arm AWAY
Latchkey instant
“LATCHKEY INST <code>”
or
“LKI <code>”
“P# LATCHKEY INST <code>”
or
“P# LKI <code>”
5 Arm HOME “HOME <code>”
or
“HM <code>”
“P# HOME <code>”
or
“P# HM <code>”
6 Arm HOME instant “HOME INST <code>”
or
“HMI <code>”
“P# HOME INST <code>”
or
“P# HMI <code>”
7 Disarm “DISARM <code>”
or
“DA <code>”
“P# DISARM <code>”
or
“P# DA <code>”
8 Turn PGM on
1
“PGM ON <code>” “P# PGM ON <code>”
9 Turn PGM off
1
“PGM OFF <code>”
“P# PGM OFF <code>”
10 Define custom
house identity
2
“HOUSE NAME <code> <house ID>”
or
“HN <code> <house ID>”
“P# HOUSE NAME <code> <house ID>”
or
“P# HN <code> <house ID>”
11 Query system
status
“STATUS <code>”
or
“ST <code>”
“P# STATUS <code>”
or
“P# ST <code>”
Note: The PowerMaster may react with a delay to received SMS messages if a GPRS session is in progress at
the same time.
1
Refers to PowerMaster-30 G2 only
2
House ID includes up to 16 characters, for example, JOHN'S HOUSE